DITL_263.txt
Items: (3 entries)
  0:
    Bounds: x1=10, y1=65, x2=70, y2=85
    Type: 4
    Info: 'Ok'
  1:
    Bounds: x1=10, y1=10, x2=180, y2=25
    Type: -120
    Info: ''
  2:
    Bounds: x1=10, y1=35, x2=180, y2=50
    Type: -112
    Info: ''

DITL_262.txt
Items: (10 entries)
  0:
    Bounds: x1=20, y1=175, x2=80, y2=200
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=100, y1=175, x2=160, y2=200
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=180, y1=175, x2=240, y2=200
    Type: 4
    Info: 'Retry'
  3:
    Bounds: x1=30, y1=10, x2=190, y2=25
    Type: -120
    Info: 'Phone Number to Dial:'
  4:
    Bounds: x1=30, y1=35, x2=220, y2=50
    Type: 16
    Info: ''
  5:
    Bounds: x1=30, y1=75, x2=90, y2=90
    Type: -120
    Info: 'Method:'
  6:
    Bounds: x1=100, y1=75, x2=160, y2=90
    Type: 6
    Info: 'Tone'
  7:
    Bounds: x1=170, y1=75, x2=230, y2=90
    Type: 6
    Info: 'Pulse'
  8:
    Bounds: x1=30, y1=125, x2=150, y2=140
    Type: -120
    Info: ''
  9:
    Bounds: x1=180, y1=125, x2=220, y2=140
    Type: 16
    Info: ''

DITL_260.txt
Items: (16 entries)
  0:
    Bounds: x1=70, y1=235, x2=140, y2=255
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=180, y1=235, x2=250, y2=255
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=5, y1=10, x2=170, y2=25
    Type: -120
    Info: 'XMODEM File Transfer'
  3:
    Bounds: x1=5, y1=55, x2=75, y2=70
    Type: -120
    Info: 'Filename:'
  4:
    Bounds: x1=80, y1=55, x2=315, y2=70
    Type: 16
    Info: ''
  5:
    Bounds: x1=5, y1=85, x2=130, y2=100
    Type: -120
    Info: 'Error-checking:'
  6:
    Bounds: x1=140, y1=85, x2=230, y2=100
    Type: 6
    Info: 'Checksum'
  7:
    Bounds: x1=240, y1=85, x2=300, y2=100
    Type: 6
    Info: 'CRC'
  8:
    Bounds: x1=5, y1=115, x2=130, y2=130
    Type: -120
    Info: 'Fork:'
  9:
    Bounds: x1=140, y1=115, x2=230, y2=130
    Type: 6
    Info: 'Resource'
  10:
    Bounds: x1=240, y1=115, x2=300, y2=130
    Type: 6
    Info: 'Data'
  11:
    Bounds: x1=5, y1=145, x2=75, y2=160
    Type: -120
    Info: 'Blocks:'
  12:
    Bounds: x1=80, y1=145, x2=315, y2=160
    Type: -120
    Info: ''
  13:
    Bounds: x1=5, y1=175, x2=75, y2=190
    Type: -120
    Info: 'Message:'
  14:
    Bounds: x1=80, y1=175, x2=315, y2=190
    Type: -120
    Info: '  '
  15:
    Bounds: x1=5, y1=205, x2=315, y2=220
    Type: -120
    Info: ''

DITL_258.txt
Items: (16 entries)
  0:
    Bounds: x1=70, y1=235, x2=140, y2=255
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=180, y1=235, x2=250, y2=255
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=5, y1=10, x2=170, y2=25
    Type: -120
    Info: 'KERMIT File Transfer'
  3:
    Bounds: x1=5, y1=55, x2=75, y2=70
    Type: -120
    Info: 'Filename:'
  4:
    Bounds: x1=80, y1=55, x2=315, y2=70
    Type: 16
    Info: ''
  5:
    Bounds: x1=5, y1=85, x2=70, y2=100
    Type: -120
    Info: 'Fork:'
  6:
    Bounds: x1=80, y1=85, x2=185, y2=100
    Type: 6
    Info: 'Resource'
  7:
    Bounds: x1=200, y1=85, x2=265, y2=100
    Type: 6
    Info: 'Data'
  8:
    Bounds: x1=5, y1=115, x2=70, y2=130
    Type: -120
    Info: 'Mode:'
  9:
    Bounds: x1=80, y1=115, x2=185, y2=130
    Type: 6
    Info: 'Text'
  10:
    Bounds: x1=200, y1=115, x2=265, y2=130
    Type: 6
    Info: 'Binary'
  11:
    Bounds: x1=5, y1=145, x2=75, y2=160
    Type: -120
    Info: 'Blocks:'
  12:
    Bounds: x1=80, y1=145, x2=315, y2=160
    Type: -120
    Info: '  '
  13:
    Bounds: x1=5, y1=175, x2=75, y2=190
    Type: -120
    Info: 'Message:'
  14:
    Bounds: x1=80, y1=175, x2=315, y2=190
    Type: -120
    Info: '  '
  15:
    Bounds: x1=5, y1=205, x2=315, y2=220
    Type: -120
    Info: ''

DITL_257.txt
Items: (35 entries)
  0:
    Bounds: x1=390, y1=40, x2=460, y2=65
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=390, y1=75, x2=460, y2=100
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=110, y1=10, x2=360, y2=25
    Type: -120
    Info: '- QVT Communication Configuration -'
  3:
    Bounds: x1=5, y1=220, x2=100, y2=235
    Type: -120
    Info: 'Config File:'
  4:
    Bounds: x1=105, y1=220, x2=225, y2=235
    Type: 16
    Info: ''
  5:
    Bounds: x1=250, y1=220, x2=320, y2=235
    Type: -120
    Info: 'Name:'
  6:
    Bounds: x1=325, y1=220, x2=465, y2=235
    Type: 16
    Info: 'QVT'
  7:
    Bounds: x1=5, y1=250, x2=100, y2=265
    Type: -120
    Info: 'Phone #:'
  8:
    Bounds: x1=105, y1=250, x2=225, y2=265
    Type: 16
    Info: ''
  9:
    Bounds: x1=250, y1=250, x2=320, y2=265
    Type: -120
    Info: 'Login File:'
  10:
    Bounds: x1=325, y1=250, x2=465, y2=265
    Type: 16
    Info: ''
  11:
    Bounds: x1=5, y1=40, x2=150, y2=55
    Type: -120
    Info: 'Communication Port:'
  12:
    Bounds: x1=160, y1=40, x2=220, y2=55
    Type: 6
    Info: 'Phone'
  13:
    Bounds: x1=260, y1=40, x2=330, y2=55
    Type: 6
    Info: 'Printer'
  14:
    Bounds: x1=5, y1=65, x2=150, y2=80
    Type: -120
    Info: 'Word Length:'
  15:
    Bounds: x1=160, y1=65, x2=220, y2=80
    Type: 6
    Info: '7 Bits'
  16:
    Bounds: x1=260, y1=65, x2=320, y2=80
    Type: 6
    Info: '8 Bits'
  17:
    Bounds: x1=5, y1=90, x2=150, y2=105
    Type: -120
    Info: 'Stop Bits:'
  18:
    Bounds: x1=160, y1=90, x2=220, y2=105
    Type: 6
    Info: '1 Bit'
  19:
    Bounds: x1=260, y1=90, x2=320, y2=105
    Type: 6
    Info: '2 Bits'
  20:
    Bounds: x1=5, y1=115, x2=150, y2=130
    Type: -120
    Info: 'Parity:'
  21:
    Bounds: x1=160, y1=115, x2=220, y2=130
    Type: 6
    Info: 'Odd'
  22:
    Bounds: x1=260, y1=115, x2=320, y2=130
    Type: 6
    Info: 'Even'
  23:
    Bounds: x1=360, y1=115, x2=420, y2=130
    Type: 6
    Info: 'None'
  24:
    Bounds: x1=5, y1=140, x2=150, y2=155
    Type: -120
    Info: 'Flow Control:'
  25:
    Bounds: x1=160, y1=140, x2=255, y2=155
    Type: 6
    Info: 'Software'
  26:
    Bounds: x1=260, y1=140, x2=355, y2=155
    Type: 6
    Info: 'Hardware'
  27:
    Bounds: x1=360, y1=140, x2=455, y2=155
    Type: 6
    Info: 'None'
  28:
    Bounds: x1=5, y1=165, x2=150, y2=180
    Type: -120
    Info: 'Baud Rate:'
  29:
    Bounds: x1=10, y1=190, x2=80, y2=205
    Type: 6
    Info: '300'
  30:
    Bounds: x1=85, y1=190, x2=155, y2=205
    Type: 6
    Info: '1200'
  31:
    Bounds: x1=160, y1=190, x2=225, y2=205
    Type: 6
    Info: '2400'
  32:
    Bounds: x1=235, y1=190, x2=300, y2=205
    Type: 6
    Info: '4800'
  33:
    Bounds: x1=310, y1=190, x2=375, y2=205
    Type: 6
    Info: '9600'
  34:
    Bounds: x1=385, y1=190, x2=450, y2=205
    Type: 6
    Info: '19200'

DITL_256.txt
Items: (32 entries)
  0:
    Bounds: x1=390, y1=40, x2=460, y2=65
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=390, y1=75, x2=460, y2=100
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=390, y1=110, x2=460, y2=135
    Type: 4
    Info: 'Reset'
  3:
    Bounds: x1=120, y1=10, x2=350, y2=25
    Type: -120
    Info: '- QVT Terminal Configuration -'
  4:
    Bounds: x1=5, y1=40, x2=120, y2=55
    Type: -120
    Info: 'Compatibility:'
  5:
    Bounds: x1=130, y1=40, x2=200, y2=55
    Type: 6
    Info: 'VT200'
  6:
    Bounds: x1=210, y1=40, x2=280, y2=55
    Type: 6
    Info: 'VT100'
  7:
    Bounds: x1=290, y1=40, x2=360, y2=55
    Type: 6
    Info: 'VT52'
  8:
    Bounds: x1=5, y1=65, x2=120, y2=80
    Type: -120
    Info: 'Keypad:'
  9:
    Bounds: x1=130, y1=65, x2=230, y2=80
    Type: 6
    Info: 'Application'
  10:
    Bounds: x1=245, y1=65, x2=345, y2=80
    Type: 6
    Info: 'Numeric'
  11:
    Bounds: x1=5, y1=90, x2=120, y2=105
    Type: -120
    Info: 'Arrow Keys:'
  12:
    Bounds: x1=130, y1=90, x2=230, y2=105
    Type: 6
    Info: 'Application'
  13:
    Bounds: x1=245, y1=90, x2=345, y2=105
    Type: 6
    Info: 'Numeric'
  14:
    Bounds: x1=5, y1=115, x2=120, y2=130
    Type: -120
    Info: 'Backspace Key:'
  15:
    Bounds: x1=130, y1=115, x2=230, y2=130
    Type: 6
    Info: 'Delete'
  16:
    Bounds: x1=245, y1=115, x2=345, y2=130
    Type: 6
    Info: 'Backspace'
  17:
    Bounds: x1=5, y1=140, x2=120, y2=155
    Type: -120
    Info: 'Scroll:'
  18:
    Bounds: x1=130, y1=140, x2=230, y2=155
    Type: 6
    Info: 'Jump'
  19:
    Bounds: x1=245, y1=140, x2=345, y2=155
    Type: 6
    Info: 'Smooth'
  20:
    Bounds: x1=5, y1=165, x2=120, y2=180
    Type: -120
    Info: 'Cursor:'
  21:
    Bounds: x1=130, y1=165, x2=230, y2=180
    Type: 6
    Info: 'Line'
  22:
    Bounds: x1=245, y1=165, x2=345, y2=180
    Type: 6
    Info: 'Block'
  23:
    Bounds: x1=5, y1=190, x2=120, y2=205
    Type: -120
    Info: 'Screen:'
  24:
    Bounds: x1=130, y1=190, x2=230, y2=205
    Type: 6
    Info: 'Normal'
  25:
    Bounds: x1=245, y1=190, x2=345, y2=205
    Type: 6
    Info: 'Inverse'
  26:
    Bounds: x1=5, y1=215, x2=105, y2=230
    Type: 5
    Info: 'Auto Wrap'
  27:
    Bounds: x1=120, y1=215, x2=220, y2=230
    Type: 5
    Info: 'Insert Mode'
  28:
    Bounds: x1=235, y1=215, x2=335, y2=230
    Type: 5
    Info: 'Warning Bell'
  29:
    Bounds: x1=350, y1=215, x2=450, y2=230
    Type: 5
    Info: 'Local Echo'
  30:
    Bounds: x1=5, y1=240, x2=105, y2=255
    Type: 5
    Info: 'AutoPrint'
  31:
    Bounds: x1=120, y1=240, x2=220, y2=255
    Type: 5
    Info: 'PrintCtrl'

DITL_102.txt
Items: (4 entries)
  0:
    Bounds: x1=20, y1=120, x2=90, y2=145
    Type: 4
    Info: 'Yes'
  1:
    Bounds: x1=110, y1=120, x2=180, y2=145
    Type: 4
    Info: 'No'
  2:
    Bounds: x1=200, y1=120, x2=270, y2=145
    Type: 4
    Info: 'Cancel'
  3:
    Bounds: x1=65, y1=10, x2=405, y2=30
    Type: -120
    Info: '^0 ^1?'

DITL_101.txt
Items: (3 entries)
  0:
    Bounds: x1=20, y1=100, x2=90, y2=125
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=65, y1=10, x2=405, y2=30
    Type: -120
    Info: '^0'
  2:
    Bounds: x1=65, y1=50, x2=405, y2=70
    Type: -120
    Info: '^1'